Nieuws

Kunnen kogellagers worden gereviseerd?

Ball bearings overhauled? Now let’s answer it.

Ten eerste, de structuur en het werkingsprincipe van kogellager

Het kogellager is een soort algemeen gebruikte mechanische delen, die uit binnen en buitenringen, ballen en kooi wordt samengesteld, en kan radiale en asladingen dragen. Het werkingsprincipe van kogellagers is het gebruik van kogels die tussen binnen- en buitenring rollen, wrijving en energieverlies verminderen, krachtoverbrenging en ondersteunende functie realiseren.

Ten tweede, de revisiemethode van kogellager

1. dismantle the kogellager: clean the surface of the bearing first, dismantle the outer ring and cage with special tools, take out the balls, and then dismantle the inner ring.
2. cleaning kogellager: use special cleaning agent to soak the ball bearing in cleaning agent, clean the outer ring, inner ring and cage, remove the surface dirt and grease.

3. check the kogellager: check the outer ring, inner ring and cage for cracks or deformation, whether the ball is worn or pitted, and whether there is any foreign matter inside the bearing.

4. Replace ball bearings: If the bearings are badly damaged, it is necessary to replace the ball bearings with new ones. When installing new ball bearings, pay attention to keep clean and correct installation method.

Three. Precautions for ball bearings

1. When disassembling and mounting ball bearings, special tools and correct methods should be used to avoid damaging the bearings and parts.
2. When cleaning ball bearings, special cleaning agents and tools should be used, and corrosive solutions such as acid and alkali should not be used.

3. when checking the kogellager, it should be carefully observed and checked to avoid omission or misjudgment.

4. when mounting new ball bearings, attention should be paid to the correct mounting position and bearing clearance to avoid shortening the bearing life due to improper mounting.

5. During the use of ball bearings, they should be inspected and maintained regularly, and the lubricating oil should be replaced and the ball bearings should be cleaned in time.

In short, Ball bearings overhauled the correct maintenance methods and precautions can help you better maintain and care for ball bearings, prolong their service life, and provide protection for the normal operation of mechanical equipment.